for more information and photos

Using Seves 117 x 117 x 60mm clear glass lenses set into stainless steel reinforced Grade 40 concrete we were able to allow a recess of 30mm from the face of the glass for a granite tile finish to each panel.

Our highly experienced staff were able to manufacture these panels to the smallest of tolerances required by the granite fixers.

Each panel size was individually engineered by our experienced design team and all the calculations provided for approval. We also provided a 1200mm x 1200mm test panel which was tested on site by the LFEPA.

We are proud to announce that the whole project was a complete success and Maylim Ltd are very happy with our performance.

View more photos on our projects page >

Andy has worked in the pavement light industry for the last 25 years and is regarded as the leading authority when it comes to producing detailed reports and helping in the design for future projects all over the UK.

Coupled with our experienced management team we will be looking to help Architects select the right products for their projects and liaise with contractors in implementing our products in the correct way.

View more on our pavement light services or pre-cast pavement lights.

Eco-friendly energy saving glass blocks

This new development in glass architecture makes it possible to design buildings completely built from glass blocks with attention given to safeguarding and protecting the environment and saving energy.

Without changing the glass block characteristics, this improves the performances relating to the reflection and transmission of solar energy in the glass block. The classic glass block is made up of two half-shells containing air without humidity.

This system, patented by Seves, is comparable to a system made up of two floating glass sheets joined together with the interposition of a ‘chamber’ containing air without humidity.

As a result, the glass surfaces increase from two to three and the combined effect of a ‘low emissive’ glass sheet, Argon gas and the three glass surfaces considerably reduces the block’s thermal transmittance value.

Most glass block walling is fire resistant, offering around 15 minutes thermal insulation and 60 minutes fire integrity, but where higher safety levels are required this new range provides protection up to 90 minutes thermal insulation and 90 minutes fire integrity.

The full range of fire resistant block includes standard and double thickness blocks in a range of styles and finishes suitable for vertical and horizontal structures.